One 0.3 oz. fl. Jar of Wire Glue
Wire Glue is a micro-carbon-based Conductive Glue glue that connects wires together in one simple step, then conducts electricity. Let it dry for a few hours, then it is good to go. This is all without any soldering or heating, plus unlike solder, it is lead-free, meaning it is totally safe.
Wire Glue is ecologically friendly - contains no harmful chemicals or flammable solvents.
Can be used for AC and DC circuits.
The glue can be painted over if required.
Examples of area of use:
model railway locomotives (broken wires for instance)
model railway buildings (add lights with no visible wires)
Christmas tree lights
Model boat lights
model railway figures (run some glue alongside the figure to bring electricity to a torch or small light)
small electronics projects
fix surface mounted components
How to use:
clean the parts to be connected (make sure they are not greasy nor oily).
stir the glue. Make sure all the particles at the bottom of the pot are mixed. If the glue is drying out, you can a few drops of water to the pot.
apply with a small brush or a cocktail stick.
wait a few hours (overnight is best) for the glue to cure. It will not conduct electricity before fully cured.
protect the connection by coating the bond with superglue or similar.
dry out mix a few drops of water.startsto- If your jar of Wire Glue
For a stronger bond, after WIRE Glue has dried over coat connection with Super Glue or similar cemment.